This document covers the version of the K1 in production as of May 2012.
K1 Standard Version Configurations
| Model | Internal Speakers | Internal Antenna | External Antenna | USB CHarging Port | OMNIKEY 5321 Reader | Front Panel Microphone |
| K1-Base | No | No | No | No | No | No |
| K1-Standard | No | No | No | No | No | No |
| K1-Ultra | Yes | Yes | No | No | No | No |
| K1-Smart | Yes | Yes | No | No | Yes | No |
Motherboard Option Compatibility
| MFG | Motherboard | Internal Speakers | Always On Charging Port | Front Panel Microphone | HDMI-CEC | USB Expansion Port |
| Intel | DH61AG | Yes | Yes | Yes | Yes | Yes |
| Intel | DN2800MT | Yes | No | Yes | Yes | No |
Cooling Options
Core Family MBs
The K1 supports either the In Win thin mini-ITX heat sink or the Intel equivalent model. The In Win unit has a couple of minor differences that the Intel one as documented in the table below.
| Feature | InWin | Intel | Note |
| Plastic marked according to ISO 11469 | Yes | No | Required for EPEAT,ECO Labels |
| Hypro long life bearing | Yes | No | |
| Rubber mounting pads | No | Yes | Not required with the InWin Design |
| Captive heat sink mounting screws | Yes | Yes |
ATOM Family MBs
The K1 offers an Atom specific cooling kit. The cooling kit includes a blower, mounting screws and standoffs.AC Adapters
Core Family MBs
The standard model of the K1 supports a 120W 100-240V AC adapter. The AC adapter is supplied with the DC connector required by the Core family motherboards. The current adapter will not work with the Intel DN2800MT motherboard. The AC adapter requires a power cord with a C8 connector for connecting to the AC adapter.
120W AC Adapter with 2 Replaceable Power Tips (1 DH61AG & 1 DN2800MT)
Part Number: 3RAMPB002601
65W AC Adapter with 2 Replaceable Power Tips (1 DH61AG & 1 DN2800MT)
Part Number: 3RAMPB002800
ATOM Family MBs
An ATOM family specific AC adapter is available. The adapter is a 65W 100- 240V unit. The AC adapter supports replaceable power tips to allow the AC adapter to be used with either Core family or ATOM family motherboards. The AC adapter is supplied with tips for both types of motherboards. The AC adapter requires a power cord with a C6 connector for connecting to the AC adapter.
Internal Optical Drive
Core Family MBs/ATOM family MBs
The standard models of the K1 support configurations with no optical drive installed. An optical drive filler plate is available for installation to cover the optical drive opening in the front bezel. Please note no EMI shield is required for the optical drive as the drive is outside the chassis EMI shield
Optical Drive Filler Plate Part Number: 2RATPC140300
Speakers
Core Family MBs/ATOM family MBs
The standard models of the K1 support the installation of dual internal 3W speakers. The speaker kit includes the mounting screws.
Dual Internal Speaker Kit (5 pcs) Part Number: 2RALZT009800
Internal USB Expansion Port
Core Family MBs
The standard models of the K1 support an internal USB expansion port. The expansion port allows for the installation of a USB device within the K1 chassis. The USB expansion port supports the installation of wireless devices with full functionality.
ATOM Family MBs
The standard models of the K1 do not support the USB expansion port with ATOM family MBs. TheATOM class MBs only has 4 front panel USB ports and all ports are used for the front panel connectors. An OEM version is possible with one of the front panel USB ports blocked off.
Internal Wi-Fi Antennas
Core Family MBs/ATOM family MBs
The standard models of the K1 support the installation of 2 antennas. The antenna is designed to
support the 2.4 and 5 GHz frequencies. This allows the antennas to support Bluetooth and 802.11 a,b,g & n. The same antenna is used for the main and auxiliary connections. The holder for the antenna is designed into the K1 chassis so only the antennas are required for installation.Internal Wi-Fi Antenna Kit (1 pc) Part Number: 3RAMWA001000
Internal Wi-Fi Antenna Bulk Kit (30 pcs) Part Number: 2RALZT009900
External Wi-Fi Antennas
Core Family MBs/ATOM family MBs
The standard models of the K1 support the installation of external 2 antennas. The antenna is designed to support the 2.4 and 5 GHz frequencies. This allows the antennas to support Bluetooth and 802.11 a,b,g & n. The same antenna is used for the main and auxiliary connections. The external antennas kit also supports using a different external antenna connection. High gain antennas, (powered or passive) can be used to extend the range of the wireless connection or improve the system performance in a difficult W-Fi environment.
The standard models of the K1 support the installation of 2 Kensington type locks. The locks can be used to secure the monitor to the K1 and the K1 to the point used to secure the units.
Core Family MBs/ATOM family MBs
The standard models of the K1 support the installation of external 2 antennas. The antenna is designed to support the 2.4 and 5 GHz frequencies. This allows the antennas to support Bluetooth and 802.11 a,b,g & n. The same antenna is used for the main and auxiliary connections. The external antennas kit also supports using a different external antenna connection. High gain antennas, (powered or passive) can be used to extend the range of the wireless connection or improve the system performance in a difficult W-Fi environment.
External Wi-Fi Antenna Kit (1 pc) Part Number: 3RAMWA001100
HID OMNIKEY® 5321 Smart Card Reader
Core Family MBs
The standard models of the K1 support the installation of the SCR using the internal USB port
connection. Therefore the internal USB port cannot be used for another purpose when the SCR is
installed. An OEM version is possible with one of the front panel USB ports blocked off that allows the SCR to be connected to one of the internal front panel USB connectors. The SCR kit includes the
mounting screws and USB cable. The SCR is supported for both contact and contactless operation.
ATOM Family MBs
The standard models of the K1 do not support the SCR with ATOM family MBs. The ATOM class MBs
only has 4 front panel USB ports and all ports are used for the front panel connectors. An OEM version is possible with one of the front panel USB ports blocked off.
HID OMNIKEY 5321 SCR & Mounting Screws Part Number: 2RALZT008200
Serial/Parallel Rear Panel Cables
ATOM Family MBs
The standard models of the K1 support the installation of a parallel port and 2 serial ports on the rear panel. A cable kit is available that provides the cables required to install the connectors in the rear panel and connect them to the motherboard.
Serial/Parallel Rear Panel Cables Part Number: Pending
The standard models of the K1 support the installation of a parallel port and 2 serial ports on the rear panel. A cable kit is available that provides the cables required to install the connectors in the rear panel and connect them to the motherboard.
Serial/Parallel Rear Panel Cables Part Number: Pending
Cover Pad Lock
Core Family MBs/ATOM family MBs
The standard models of the K1 support the installation of 2 Pad Locks to secure the cover in place. The pad locks should have a maximum diameter of 5mm and an opening of 20mm. See the picture below for specific dimensions.
Kensington Locks
Desktop Security Plate
Core Family MBs/ATOM family MBs
The standard models of the K1 support installation using a desktop security plate. The security plate is designed to be bolted to a desktop mounting surface to provide an anchor point for the system. The AC adapter and required cables can be mounted in the security plate to prevent access to the system’s various cable connections. The security plate includes a number of cable strain relief points to prevent damage to the cables from attempts to pulls the cables out. A set of mounting rails are then installed on the bottom of the K1 and the unit is slide into the desktop security plate. The K1 unit is then secured in place using one or two padlocks. Access to the monitor arm mounting screws is also prevented once the K1 is installed in the desktop security plate. It is recommended that only internal antennas are used in configurations that will be mounted in the desktop securing plate.
Desktop Mounting Plate
Core Family MBs/ATOM family MBs
The standard models of the K1 support installation using a desktop mounting plate. The desktop
mounting plate is similar in design to the desktop security mounting plate however full access to the rear panel connectors is provided.
Specialized Options
The following options are available on an OEM basis.
Consumer Infrared Remote Control
The standard models of the K1 support installation of a front panel with a RC6 IR remote compatible interface. The front panel module also supports 2 USB 2.0 ports, one of which is equipped with a USBBCS Version 1.2 compatible charging port and a HD Audio speaker and microphone connectors.
Monitor Arms
The standard models of the K1 support a number of different monitor arms. All monitor options are
support on either the Core family or ATOM family motherboards.
No Monitor configurations
The standard models of the K1 support not having any monitor arm installed. A plastic blanking plate is available to covers the opening normally used for the monitor arm. The K1 is designed to support placing a standard monitor on top of the unit.
No Monitor Filler Plate Part Number: 2RAFPC044000
Adjustable Monitor Arm
The standard models of the K1 support a monitor mounting arm that allows for 100mm of vertical
height adjustment. The monitor arm supports both portrait and landscape orientations and provides for tilt adjustment of the monitor. The adjustable monitor arm supports monitors with a display area of 19 – 27” that have a 75 or 100mm VESA mounting featured. The adjustable monitor arm is supplied with 4mm X 10mm mounting screws for mounting the monitor.
height adjustment. The monitor arm supports both portrait and landscape orientations and provides for tilt adjustment of the monitor. The adjustable monitor arm supports monitors with a display area of 19 – 27” that have a 75 or 100mm VESA mounting featured. The adjustable monitor arm is supplied with 4mm X 10mm mounting screws for mounting the monitor.
Adjustable Monitor Arm (arm, screw & filler panel) Part Number: 2RALZT009100
No comments:
Post a Comment